
Yes, loose pool deck pavers can almost always be reset. The most common fix involves re-securing the pavers using concrete or a concrete-based setting material to lock them firmly back in place. The right approach depends on how many pavers are affected and what caused them to shift in the first place.
A homeowner in Litchfield, NH recently reached out to us about a familiar problem. Their pool deck pavers, which we had installed years earlier, were getting pulled up by their Loop-Loc pool cover. Over time, the tension from the cover anchors was working against the pavers, slowly lifting them out of position. It is a more common issue than most people realize, and the good news is it is fixable.
At Trimmers Landscaping, we have been installing and repairing hardscape surfaces for years. When pavers around a pool start to shift, we know exactly what to look for and how to get them stable again.
What Causes Pool Deck Pavers to Come Loose?
Pavers can loosen for several reasons, but around pools, the most overlooked cause is mechanical tension from pool cover anchor systems. Loop-Loc covers and similar safety covers use anchors that are set into the paver field. When the cover is pulled tight across the pool, those anchors create outward pressure that can gradually work pavers free, especially if the original base has settled or shifted over time.
Other common causes include:
- Freeze-thaw cycles lifting pavers over multiple winters
- Base material erosion from poolside water runoff
- Root growth beneath the surface
- Original base settling after years of use
Identifying the cause matters because it helps determine the right repair method. A paver that came loose due to base erosion needs a different fix than one pulled up by cover tension.
How Are Loose Pool Deck Pavers Reset?
The most reliable way to re-secure loose pavers, especially around pool cover anchors, is to reset them with concrete or a concrete-based adhesive. Standard polymeric sand works well for general paver joints, but when anchors are involved, you need something with more holding strength.
Here is a general idea of what the repair process looks like:
- Remove the affected pavers carefully to avoid damaging surrounding ones
- Inspect and repair the base material underneath if it has shifted or eroded
- Reset the pavers and secure them using concrete or a compatible setting compound
- Re-anchor pool cover hardware once the repair has cured
Every situation is a little different. That is why we always ask homeowners to send photos before we give a recommendation. The scope of the repair, and what materials make the most sense, really does come down to what we can see on site.
Our patios and walkways services cover exactly this kind of hardscape repair work, including pool deck paver resetting.
Is This Something You Should DIY or Hire Out?
For one or two pavers that have simply shifted, a motivated homeowner can sometimes handle the reset themselves. But when pool cover anchors are involved, or when several pavers across a section are affected, it is worth bringing in a pro. Getting the base right matters. A paver that looks level but sits on a compromised base is just going to come loose again.
Our experienced team can assess the full picture, not just the pavers you can see moving, but the underlying conditions that caused the problem. That is the difference between a repair that lasts and one that needs to be redone in another season.
Frequently Asked Questions
Can concrete be used around pool pavers without affecting the look?
Yes. When applied correctly and in targeted areas, concrete setting material is used beneath or between pavers where it is not visible on the surface. The finished look of the paver field stays intact. Your contractor can walk you through exactly what the repair will look like before any work begins.
How many pavers need to be loose before it is worth calling someone?
Honestly, even one or two loose pavers near pool cover anchors is worth addressing. If the anchor system is the cause, the problem will keep spreading as the cover continues to apply tension. Catching it early usually means a smaller, less involved repair.
Does the repair require removing the pool cover hardware?
In most cases, yes, at least temporarily. The anchors typically need to come out so the pavers can be properly reset and the concrete can cure fully before the hardware is reinstalled. Your contractor can coordinate that as part of the job.
Get Your Pool Deck Pavers Checked Out
If your pool deck pavers are shifting or pulling up, do not wait until the problem gets bigger. Homeowners across Litchfield, NH trust us to handle exactly this kind of repair, and we are happy to take a look. Snap a few photos of the affected area and contact us to get the conversation started. We will review what you send and follow up with honest guidance on next steps.



